Precision-control-systems 5420 Manual do Utilizador descarregar pdf (Página 8)

Model 5420 ControlIR

User Manual Installation

Research, Inc.

Model 5420mA

To connect the wires for the 4-20mA input on the Model 5420mA

unit follow these steps:

Control Wiring

1.) Remove the 90° connector from the top of the 5420mA.

2.) Remove the (1) larger screw to take the connector apart.

3.) Install wires through the rubber strain relief on the top half of

the connector. Loosen the 2 screws of the cable clamp and

slide the cable through.

4.) Strip the wires and solder into pins 1 and 3. Pin 1 is + pin 3

is -.

5.) Reassemble the connector when complete, tightening the

cable clamp when complete.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Sem comentários

Precision-control-systems 5420 Manual do Utilizador Página 8